Set up your fireplace in 1 minute 🔥
Installez votre cheminée en 1 minute 🔥
Follow the step-by-step video. No tools, no renovation.
Suivez la vidéo pas à pas — sans outils, sans travaux.
Quick checklist before you start
Check-list rapide avant de commencer
- Unpack all the parts and lay them out on a flat surface.
- Check the contents of the package (see “What’s in the box” below).
- Read our safety tips (section further down).
- Keep a soft cloth handy to wipe off any marks.
- Déballez toutes les pièces et posez-les sur une surface plane.
- Vérifiez le contenu du colis (voir “Ce que contient la boîte” ci-dessous).
- Lisez nos conseils de sécurité (section plus bas).
- Ayez un chiffon doux à portée de main pour essuyer d’éventuelles traces.
Setup steps
Étapes d’installation
- Base & stability: Place the base on the floor and make sure it’s stable and level.
- Attach the stand: Line up the stand with the base (the pre-installed screws may be in the foot: unscrew them, then tighten firmly).
- Burner tank: Place the stainless steel tank in its slot, nicely centered.
- Final check: Make sure every part is securely in place and nothing wobbles.
- First light: Pour the bioethanol into the tank, wait 30 to 60 seconds, then light it with a long lighter.
The flame reaches full intensity after a few minutes. That’s completely normal.
The flame reaches full intensity after a few minutes. That’s completely normal.
- Base & stabilité — Posez la base au sol, vérifiez qu’elle est stable et à niveau.
- Fixation du support — Alignez le support sur la base (les vis pré-montées peuvent être dans le pied : dévissez puis resserrez fermement).
- Réservoir — Positionnez le réservoir en inox dans son logement prévu, bien centré.
- Contrôle final — Assurez-vous que toutes les pièces sont bien fixées et que rien ne bouge.
5. Premier allumage — Versez le bioéthanol dans le réservoir, attendez 30–60 sec, puis allumez avec un allume-feu long.
Le feu atteint sa pleine intensité après quelques minutes — c’est normal.
5. Premier allumage — Versez le bioéthanol dans le réservoir, attendez 30–60 sec, puis allumez avec un allume-feu long.
Le feu atteint sa pleine intensité après quelques minutes — c’est normal.
What’s in the box
âś… Base & stand
âś… Safety stainless steel tank
âś… Flame guard / glass panels (depending on model)
âś… Snuffer tool / lid
âś… User manual
If anything is missing, contact us right away. We’ll take care of everything.
Safety tips
âś… Only use liquid bioethanol made for decorative fireplaces.
✅ Never refill a tank that’s hot or lit (wait until it has fully cooled down).
âś… Light with a long lighter and keep your face away from the burner.
✅ Never move the fireplace while it’s lit or still hot.
âś… Air out the room a little during extended use.
âś… Keep it away from curtains, fabrics and anything flammable.